مجله علوم و فنون دریایی

مجله علوم و فنون دریایی

ررسی رفتار خمشی و شکست مود-I کامپوزیت های پلیمری مسلح شده با الیاف پلی پروپیلن و شیشه حاوی خاکستربادی و سیمان

نوع مقاله : مقاله پژوهشی

نویسندگان
1 گروه مهندسی دریا-عمران، دانشکده مهندسی دریا، دانشگاه علوم و فنون دریایی خرمشهر، خرمشهر، ایران.
2 گروه مهندسی آب، دانشکده عمران، دانشگاه علم و صنعت ایران، تهران، ایران.
چکیده
هدف اصلی این پژوهش، بررسی مستقل تأثیر چهار پارامتر کلیدی شامل جنس الیاف (شیشه و پلی‌پروپیلن)، طول الیاف (۱۲ و ۵۰ میلی‌متر)، نوع پرکننده معدنی (سیمان پرتلند و خاکستربادی) و درصد وزنی پرکننده (صفر، ۲۰ و ۴۰ درصد) بر استحکام خمشی و چقرمگی شکست کامپوزیت‌های اپوکسی است. برخلاف اغلب پژوهش‌های پیشین، بدین منظور، ۴۵ طرح اختلاط مختلف ساخته شد و آزمون‌های خمش و چقرمگی شکست بر روی نمونه‌ها انجام گرفت. همچنین، برای شناسایی مکانیزم‌های شکست، سطوح شکست نمونه‌های منتخب با استفاده از میکروسکوپ الکترونی روبشی مورد بررسی قرار گرفتند. نتایج نشان داد که افزودن الیاف به‌تنهایی (بدون فیلر) عملکرد مکانیکی را به‌شدت بهبود می‌بخشد، به‌گونه‌ای که نمونه حاوی ۱٫۵ درصد وزنی الیاف شیشه با طول ۵۰ میلی‌متر، بیشترین استحکام خمشی (۸۴ مگاپاسکال) و چقرمگی شکست (۲٫2 مگاپاسکال‌مجذور متر) را ثبت کرد که به‌ترتیب افزایشی ۶۸ درصد و ۷۶ درصد نسبت به نمونه خالص رزین نشان می‌دهد. در مقابل، افزودن پرکننده‌های معدنی به‌تنهایی باعث کاهش چشمگیر هر دو پارامتر گردید، به‌گونه‌ای که در ۴۰ درصد وزنی سیمان، استحکام تا ۵۸ درصد کاهش یافت. در حضور همزمان الیاف و فیلر، نمونه‌های دارای ۲۰ درصد وزنی فیلر عملکرد قابل‌قبولی از خود نشان دادند (به‌عنوان مثال، ترکیب ۲۰ درصد سیمان با ۱٫۵ درصد الیاف شیشه ۵۰ میلی‌متری استحکامی برابر با ۷۰٫۹ مگاپاسکال ارائه داد)، اما در درصد بالای فیلر (۴۰ درصد)، افت خواص به‌طور کامل قابل جبران نبود. الیاف شیشه در تمامی سطوح، عملکرد برتری نسبت به الیاف پلی‌پروپیلن داشت و افزایش طول الیاف از ۱۲ به ۵۰ میلی‌متر، به‌ویژه در بهبود چقرمگی شکست مؤثر بود (سهم ۴۲ درصد در تغییرات)، هرچند این اثر در حضور ۴۰ درصد فیلر به کمتر از ۱۵ درصد کاهش یافت.
کلیدواژه‌ها
موضوعات

Açıkbaş, G., Özcan, S. and Çalış Açıkbaş, N., 2018. Production and characterization of a hybrid polymer matrix composite. Polymer Composites, 39(11), pp.4080-4093. Doi: 10.1002/pc.24471. 
Ahirwar, D., Purohit, R. and Dixit, S., 2024. Eco‐friendly recycled glass fiber and bamboo fiber reinforced epoxy‐SiO 2 polymer hybrid composite: Development and mechanical characterization. Polymer Composites, 45(7), pp.6093-6110. Doi: 10.1002/pc.28181. 
Cai, H., Ye, J., Wang, Y., Shi, Y., Saafi, M. and Ye, J., 2023. Microscopic failure characteristics and critical length of short glass fiber reinforced composites. Composites Part B: Engineering, 266, p.110973. Doi: 10.1016/j.compositesb.2023.110973
Castro, R.G., Amorim, F.C. and Reis, J.M.L., 2020. Effects of fiber length on the performance of piassava-reinforced epoxy composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234(11), pp.1431-1438. Doi: 10.1177/1464420720944982.
De, B., Bera, M., Bhattacharjee, D., Ray, B.C. and Mukherjee, S., 2024. A comprehensive review on fiber-reinforced polymer composites: Raw materials to applications, recycling, and waste management. Progress in Materials Science, 146, p.101326. Doi: 10.1016/j.pmatsci.2024.101326
El-Sagheer, I., Abd-Elhady, A.A., Sallam, H.E.D.M., Naga, S.A. and Sayed, S.A.A., 2022. Flexural and fracture behaviors of functionally graded long fibrous polymeric composite beam-like specimens. Composite Structures, 300, p.116140. Doi: 10.1016/j.compstruct.2022.116140
Eterigho-Ikelegbe, O., Yoro, K.O. and Bada, S., 2021. Coal as a filler in polymer composites: a review. Resources, Conservation and Recycling, 174, p.105756. Doi: 10.1016/j.resconrec.2021.105756.
Golestaneh, M., Amini, G., Najafpour, G.D. and Beygi, M.A., 2010. Evaluation of mechanical strength of epoxy polymer concrete with silica powder as filler. World Applied Sciences Journal, 9(2), pp.216-220.
Gong, L.X., Hu, L.L., Zang, J., Pei, Y.B., Zhao, L. and Tang, L.C., 2015. Improved interfacial properties between glass fibers and tetra-functional epoxy resins modified with silica nanoparticles. Fibers and Polymers, 16(9), pp.2056-2065. Doi: 10.1007/s12221-015-5338-2
Jeong, Y.J., Kim, H.T., Kim, J.D., Kim, J.H., Kim, S.K. and Lee, J.M., 2023. Evaluation of mechanical properties of glass fiber-reinforced composites depending on length and structural anisotropy. Results in Engineering, 17, p.101000. Doi: 10.1016/j.rineng.2023.101000. 
Karunakaran, K., Singh, S.S. and Kitey, R., 2022. Investigating the role of filler shape on the dynamic mechanical properties of glass‐filled epoxy composites. Polymer Composites, 43(10), pp.6912-6925. Doi: 10.1002/pc.26737
Kim, D., Chung, I. and Kim, G., 2013. Study on mechanical and thermal properties of fiber-reinforced Epoxy/Hybrid-silica composite. Fibers and Polymers, 14(12), pp.2141-2147. Doi: 10.1007/s12221-013-2141-9.
Lin, C., Kanstad, T., Jacobsen, S. and Ji, G., 2023. Bonding property between fiber and cementitious matrix: A critical review. Construction and Building Materials, 378, p.131169. Doi: 10.1016/j.conbuildmat.2023.131169
Mirsayar, M.M., Shi, X. and Zollinger, D.G., 2017. Evaluation of interfacial bond strength between Portland cement concrete and asphalt concrete layers using bi-material SCB test specimen. Engineering Solid Mechanics, 5(4), 293–306. Doi: 10.5267/j.esm.2017.8.001
Mousavi, S., Ghasemi, M. and Dehghani, M., 2024. Investigating the fracture toughness of the self compacting concrete using ENDB samples by changing the aggregate size and percent of steel fiber. Engineering Solid Mechanics, 12(1), pp.17-26.
Naser, M.Z., Hawileh, R.A. and Abdalla, J.A., 2019. Fiber-reinforced polymer composites in strengthening reinforced concrete structures: A critical review. Engineering Structures, 198, p.109542. Doi: 10.1016/j.engstruct.2019.109542
Shahbazian, B. and Mirsayar, M., 2023. Fracture mechanics of cellular structures: past, present, and future directions. Eng. Solid Mech, 11(2), pp.231-242.
Shao, S., Tian, Y., Zhou, H., Song, Y., Lian, H., Wu, H., Duan, Q. and Xie, Q., 2020. Effect of morphology and particle size of bismuth ferrite filler on the surface insulation of epoxy resin composites. Polymer Composites, 41(11), pp.4514-4525. Doi: 10.1002/pc.25728
Singh, S.S., Chakraborty, P. and Kitey, R., 2019. Deformation characteristics of glass‐filled epoxy composite under compression: role of filler shape and volume fraction. Polymer Composites, 40(12), pp.4726-4741. Doi: 10.1002/pc.25341
Zanotti, C., Rostagno, G. and Tingley, B., 2018. Further evidence of interfacial adhesive bond strength enhancement through fiber reinforcement in repairs. Construction and Building Materials, 160, pp.775-785. Doi: 10.1016/j.conbuildmat.2017.12.140

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 24 آبان 1405

  • تاریخ دریافت 20 مرداد 1405
  • تاریخ بازنگری 31 شهریور 1405
  • تاریخ پذیرش 24 آبان 1405
  • تاریخ انتشار 24 آبان 1405