@article { author = {Dordizadeh basirabad, Ahmad and Chegini, Vahid and مهدیزاده, مهدی محمد and کامران زاد, بهاره}, title = {Investigation on Wave energy in Amirabad seaport of Caspian Sea using SWAN model results}, journal = {Journal of Marine Science and Technology}, volume = {13}, number = {2}, pages = {71-80}, year = {2014}, publisher = {Khorramshahr University of Marine Science and Technology}, issn = {2008-8965}, eissn = {2538-5380}, doi = {10.22113/jmst.2014.7818}, abstract = {In this study, SWAN numerical model used to modeling waves and obtain the significant wave height in range of Amirabad seaport of Caspian Sea. To do this, first, a general model to modeling the wave height in the entire Caspian Sea was built. Then the boundary conditions obtained from the general model, by using the NEST operation of SWAN model, modeling the local with higher magnification in the area Amirabad Seaport was used. The local models built in the Amirabad, was calibration and verification with waves profile data recorded by buoys deployed in that area. Comparison the results with data measured by the Amirabad buoy shows that modeling done in this area had a good accuracy. Then running the SWAN model for three years and Obtained significant wave height in the desired location. Finally the wave energy obtained from significant wave height.}, keywords = {"SWAN model","significant wave height"," NEST operation","Amirabad Seaport","wave energy"}, title_fa = {بررسی انرژی امواج در بندر امیرآباد دریای خزر با استفاده از نتایج مدل SWAN}, abstract_fa = {در این تحقیق، از مدل عددی SWAN برای مدل سازی امواج و بدست آوردن ارتفاع موج مشخصه در محدوده ی بندر امیرآباد دریای خزر استفاده شد. برای این کار، ابتدا یک مدل کلی جهت مدل سازی ارتفاع موج در کل محدوده ی دریای خزر ساخته شد. سپس از شرایط مرزی به دست آمده از مدل کلی، با استفاده از عمل آشیانه سازی مدل SWAN ، مدل سازی محلی با درشت نمایی بیشتر در منطقه‌ی بندر امیرآباد استفاده شد. مدل محلی ساخته شده در منطقه ی امیرآباد با استفاده از اطلاعات ثبت شده مشخصات موج توسط بویه ی مستقر در آن منطقه واسنجی و درستی سنجی شد. مقایسه نتایج به دست آمده با اطلاعات اندازه گیری شده توسط بویه ی امیرآباد نشان می دهد که مدل سازی انجام شده در این منطقه از دقت خوبی برخوردار است. سپس مدل SWAN برای زمان سه سال اجرا و در مکان مورد نظر ارتفاع موج مشخصه بدست آمد. در نهایت انرژی موج با استفاده از ارتفاع موج مشخصه به دست آمد.}, keywords_fa = {"مدل SWAN","ارتفاع موج مشخصه","عمل آشیانه سازی","بندر امیرآباد","انرژی موج"}, url = {https://jmst.kmsu.ac.ir/article_7818.html}, eprint = {https://jmst.kmsu.ac.ir/article_7818_5b32526af272eea66e0f822aef6e839c.pdf} }