@article { author = {Akbari, Parastoo and Sadrinasab, Masoud and Chegini, Vahid and Siadat Mousavi, Seyed Mostafa}, title = {Study of tidal components amplitude distribution in the Persian Gulf, Gulf of Oman and Arabian Sea using numerical simulation}, journal = {Journal of Marine Science and Technology}, volume = {16}, number = {3}, pages = {27-41}, year = {2017}, publisher = {Khorramshahr University of Marine Science and Technology}, issn = {2008-8965}, eissn = {2538-5380}, doi = {10.22113/jmst.2016.15419}, abstract = {Tide is one of the most regular changes of seas and ocean levels which are offering particular importance due to the influence on the flow pattern. According to engineering and environmental needs in industrial economic zone of Persian Gulf, Strait of Hormuz and Gulf of Oman, knowing the tidal characteristics of these areas is important. Therefore FVCOM (ocean model) was used to stimulate the tidal amplitude in an area comprising Persian Gulf, Strait of Hormuz, Gulf of Oman and Arabian Sea. Finite volume method is used in this model to discretize the hydrodynamic equations on triangular mesh. Uniform mesh is used with a resolution of 5 km in the model.The constant values of eight diurnal and semidiurnal tidal components are prescribed along the open boundary. In order to validate the model results, after applying harmonic analysis on the model outputs in desired stations, the achieved amplitude of this analysis compared with results which are obtained from the analysis on the available measurement data in these stations. According to the measurement and model results in these stations, meanwhile identifying the four main tidal components, the amplitude pattern of these components was determined in the whole domain. Also, by using amplitude of main components and estimating of F factor, the type of tide was predicted in the study area. Moreover, studying the maximum amounts of tidal velocity in the study area shows that the amount of this velocity in the Gulf of Oman and Arabian Sea is less than 0.1 m/s.}, keywords = {Tidal components amplitude,FVCOM model,Persian Gulf,Gulf of Oman,Arabian Sea}, title_fa = {مطالعه و بررسی توزیع دامنه مؤلفه‌های جزرومدی در خلیج فارس، دریای عمان و دریای عرب با استفاده از شبیه‌سازی عددی}, abstract_fa = {جزرومد به عنوان یکی از منظم ترین تغییرات سطح آب دریاها و اقیانوس‌ها محسوب می‌شود که به علت تأثیرگذاری بر الگوی جریان از اهمیت ویژه‌ای برخوردار است. نظر به نیازهای مهندسی و زیست محیطی در منطقه اقتصادی- صنعتی خلیج فارس، تنگه هرمز و دریای عمان، اطلاع از ویژگی‌های جزرومدی این مناطق دارای اهمیت است. برای این منظور از مدل اقیانوسی FVCOM استفاده شده تا دامنه جزرومدی در منطقه شامل خلیج فارس، تنگه هرمز، دریای عمان و دریای عرب شبیه‌سازی گردد. این مدل از روش حجم محدود برای گسسته‌سازی معادلات هیدرودینامیکی بر روی شبکه مثلثی استفاده می‌کند. شبکه یکنواخت با تفکیک‌پذیری 5 کیلومتر در مدل به کار رفته است. مقادیر ثابت هشت مؤلفه روزانه و نیم‌روزانه در مرز باز به مدل اعمال گردید. به منظور اعتبارسنجی نتایج مدل، پس از اعمال آنالیز هارمونیک برروی خرو.جی‌های مدل در ایستگاه‌های مورد نظر، دامنه بدست آمده از این آنالیز با نتایج بدست آمده از انجام آنالیز برروی اطلاعات اندازه‌گیری موجود در این ایستگاه‌ها مقایسه گردید. با توجه به نتایج اندازه‌گیری و محاسبات مدل در این ایستگاه‌ها، ضمن شناسایی چهار مؤلفه جزرومدی اصلی، الگوی دامنه این مؤلفه‌ها در کل منطقه مدل‌سازی تعیین شد. همچنین با استفاده از دامنه مؤلفه‌های اصلی و تخمین فاکتور F در کل منطقه، نوع جزرومد در منطقه مورد مطالعه پیش بینی گردید. همچنین بررسی مقادیر بیشینه سرعت جزرومدی در منطقه‌ی مورد مطالعه نشان می‌دهد که مقدار این سرعت در دریای عمان و دریای عرب کمتر از m/s 1/0 است.}, keywords_fa = {دامنه مؤلفه‌های جزرومدی,مدل FVCOM,خلیج فارس,دریای عمان,دریای عرب}, url = {https://jmst.kmsu.ac.ir/article_15419.html}, eprint = {https://jmst.kmsu.ac.ir/article_15419_d8ef7de7fa0ea26375ddd56d5a98fcef.pdf} }